You don’t need to make a trip to the auto shop for that pesky dent!
If you’ve got a pesky dent in your vehicle after an accident, you don’t have to worry about expensive repairs. here are actually plenty of DIY methods that can help you get rid of the dent without spending a fortune. From using a vacuum cleaner to boiling water, we show you four unexpected ways to take out dents from your car’s body.
Say goodbye to expensive bills and long repair times! With these 4 unconventional methods, you can restore your car’s body quickly, conveniently and cheaply — without having to hire an auto-body professional.
Learn how to take out a dent the smart way — try these 4 unexpected methods!
DIY Tips and Tricks to Remove a Car Dent Easily & Safely
#1: Compressed Air & Hot Water
Removing dents with compressed air and hot water is an effective and affordable way to repair minor dents in your car. This method uses a combination of pressurized air and hot water to loosen the dent from the surface of the vehicle. The process requires a few simple tools such as an air compressor, a bucket of hot water, a rubber mallet or hammer, and some lubricant like WD-40.
It is also much more affordable than other methods for removing dents such as paintless dent repair or body filler. With this method, you can restore your car’s original shape without spending too much money or time.
#2: Dry Ice
Dry ice is a great way to remove dents from your car without causing any damage to the paint. It is a fast and efficient process that can save you time and money compared to traditional methods.
The process involves using dry ice to freeze the metal in the dent, which causes it to expand and pop out of shape. This method is also much safer than traditional methods, as it does not require any chemicals or tools that could potentially damage your car’s paint job. Furthermore, it is also cost-effective and eco-friendly as it does not produce any hazardous waste products.
To do this, use tongs to place a piece of dry ice onto the cavity. Be sure to not keep it there for more than a minute. After removal, the area should become level with the rest of the surface. If needed, repeat these steps until desired outcome is achieved. Remember to use thick gloves and safety glasses when handling this item, as contact with bare skin can lead to painful consequences similar to a burn.
#3: Vacuum Cleaners
Having car dents can not only be ugly but also cost you a fortune when getting it repaired. Now, you can easily get rid of those dents with a vacuum cleaner! Just attach the innovative dent remover tool to a vacuum cleaner and watch it work its magic.
Vacuum cleaners are a great tool for removing dents from cars, furniture, and other surfaces. With the right technique and equipment, you can use a vacuum cleaner to remove dents quickly and easily.
Before you begin, make sure that your vacuum cleaner has a hose attachment. It also helps if the hose is about three feet long. Take the front bumper off of your car and remove any dents from the bottom of it with your fingers. This will help push out any water trapped in the dent while you work on it with your vacuum cleaner.
Use one hand to guide the hose around a dent and use other hand to move the brush along a hole in order to clean debris out of them. If there is too much debris stuck in a dent, use your vacuum cleaner’s suction to clear it out.
Now that you have cleaned up all the dirt and water, it’s time to wash off your car! You might want to do this with a hose, bucket or a sponge. Rinse with running water then use soap and rinse again before drying.
#4: Plunger Method
Got a bathroom? You surely do—then it’s a surefire that you also got a plunger.
Not only is a plunger useful for removing clogs from drains, it can also be used to get rid of small to medium dents in your vehicle. Plungers are an effective tool for removing small and medium-sized dents from cars.
While it won’t be a great solution for large or deep dents, it can be helpful when dealing with shallow imperfections on the body of your car. So if you ever need to fix up a few scratches and bumps, remember to get out your plunger!
To remove a dent from your sink, simply dampen a cup plunger with water and insert it into the affected area. Start pushing and pulling until the object is dislodged. It is important to note that cup plungers are intended for sinks while flange ones are used for toilets.
In case your plunger fails to create suction, it could be because you’re using the wrong type of plunger, not enough water or the dent is too deep to be removed with this technique.
Don’t Want to Risk Your Car With DIY Methods? Seek Professional Help!
Trying to remove dents from your car can be a daunting task. It requires time, effort and knowledge that many of us just don’t have. Fortunately, there is an alternative: professional help. With the help of experienced auto body repair specialists, you can get those pesky dents removed quickly and efficiently – leaving you with a car that looks as good as new!
At Piedmont Dent Repair, we offer professional auto dent removal services. Not sure if your car requires repair or not? We can also provide you with a free estimate on the cost of repairing dents and dings in your vehicle.
We use state-of-the-art tools and techniques to ensure that your car is returned to its original condition as quickly as possible. Not only will our services save you time and money, but they’ll also help keep your car looking its best.
